Quick Answer: How Thick Should Wood Be For Shelves?

What kind of plywood do you use for shelves?

Stainable and paintable plywood are often used to make shelving, cabinets and furniture..

Can I make shelves out of plywood?

Cut the plywood in the direction of the grain. Plywood shelving always mounts with the grain pattern running from side to side. … The thicker the plywood, the sturdier it will be. Shelving made from 3/4-inch plywood will be a sturdier base for heavy items than 1/2-inch thick plywood.

How thick should floating shelves be?

3 inchesThis is the shelf tutorial you need! I love the look of floating built-in shelves, but most tutorials have shelves that look very bulky and are at least 3 inches thick.

How thick should Plywood be for shelves?

The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.

How much weight can 3/4 plywood support?

50 lbs.Other widely used plywood types include 3/4 inch, which is one of the most widely used of all plywood thicknesses. A 12-by-36-inch piece of 3/4-inch fir plywood can support up to 50 lbs. without problems. Plywood strength drops when thickness diminishes.

How thick should Plywood be for garage shelves?

TIP: To optimize plywood use, plan your shelving to be 12″, 16″ or 24″ in width. Then you can rip your plywood into either four 12″ wide strips, three 16″ wide strips or two 24″ wide strips with no waste.

What is the best wood to use for shelving?

The Best Wood to Use for Wood ShelvesPine. Pine is one of the most affordable and popular softwoods in the market. … Plywood. Plywood is another good option for people who are interested in making their own shelves. … Cherry. Although cherry is a hardwood, it is lightweight and easy to use. … Koa. … Red Oak. … Paduak. … Mahogany.

What are the disadvantages of MDF wood?

Disadvantages of Medium Density FibreboardMDF is comparatively weaker than wood. … MDF can crack or split under extreme stress.MDF absorbs water quicker than wood. … MDF doesn’t take nails and screws easily. … MDF contains VOC, containing urea formaldehyde, that can cause irritation to lungs and eyes.More items…

Should I use plywood or MDF?

Also due to its non-directional grain structure, MDF is ideal for cutting, machining and drilling without splinters or chipping. … Plywood is generally used for doors, stairs, flooring and exterior projects but also bends easily with the grain, so it is often used to create curved surfaces.

How far can a shelf span without support?

The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.

Can I use MDF for shelves?

MDF is commonly used for shelving in closets and cabinets because it’s inexpensive and smooth. But MDF isn’t as stiff as plywood and will sag over time. … The MDF edge will absorb a lot of glue, so spread on a light coat, give it a minute to soak in, and apply another bead before you add the wood nosing.

How do you make a shelf not wobble?

Drill a hole for each foot in the underside of one of the legs and tap in the foot, using a hammer. Right the bookshelf and put it back into position. Raise or lower each foot until the bookcase stops wobbling. Raise the feet by turning them clockwise; lower them by turning them counterclockwise.

How wide should shelf supports be?

A bookshelf should be at least 9 inches wide. Allow 11 inches for magazines. The length will be determined by the wall’s size and the number of shelf supports that you can install. Generally 3/4-inch thick shelves should be supported every 32 inches with a bracket (the shelves can overhang the supports by 6 inches).

How far will 3/4 plywood span?

Uniform load deflection limitation: 1/180 of span under live load plus dead load, 1/240 of span under live load only. Maximum span 24 inches for 15/32-and 1/2-inch panels. Maximum span 24 inches where 3/4-inch wood finish flooring is installed at right angles to joists.

Is MDF or plywood better for shelves?

When it comes to strength, plywood is the winner. MDF is a softer material than plywood and tends to sag or split under pressure. That’s why it’s important to reinforce it if you’re going to using it to build shelves or other weight-bearing furniture.